Plumber in Papanui
Plumber in Papanui, Christchurch
Whitehead Plumbing & Gas are registered Master Plumbers covering Papanui. Papanui is an older suburb with a real mix of pipework, and most of what we find comes down to what has been changed over the years and by whom.
Standard hours Monday to Friday, 8am to 4:30pm. Urgent callouts after hours.
- Council
- Christchurch City CouncilDrainage and building consents
- Typical pipework
- A genuine mixDecades of changes layered on top of each other
- Worth knowing
- Pressure fittings damage easilyOften by other trades working in the roof or subfloor
- Most common call-out
- Toilet cisterns and header tanksBall cocks, cistern repairs, cylinder alterations
local
What We Typically Find On Site
Papanui has the same mixed pipework you find in Hornby, which is what happens in an established suburb where houses have been altered and repaired over several decades. You rarely find one system. You find three or four, joined together by whoever happened to be there at the time.
Damaged pressure fittings
The thing we come across most is pressure pipe fittings that have been damaged by someone working in the roof space or under the floor. Not plumbers, usually. Electricians, insulation installers, anyone who needs to get into a tight space and has to move something to do it. A knocked fitting does not always leak straight away, which is why the damage often turns up long after whoever caused it has gone.
If you are upgrading, upgrade properly
This is the advice we give most often in Papanui. When you are doing work anyway, it is worth removing as much of the old pipework as you reasonably can and upgrading the hot and cold water system together rather than patching one section at a time.
Patching is cheaper on the day. It also means you keep the weakest part of the system and add a new join to it, and you will be back doing the next section soon enough.
What we get called for
Mostly header tanks and toilets. Ball cock replacements in header tanks, repairs to toilet cisterns, and hot water cylinder alterations where something has started leaking.
Common call-outs in Papanui
- 01Ball cock replacements in header tanks
- 02Toilet cistern repairs
- 03Hot water cylinder alterations where a leak has started
- 04Pressure fittings damaged by work in the roof or subfloor
- 05Full hot and cold water upgrades during renovations
proof
Recent work in Papanui
Whitehead Plumbing & Gas work across Papanui regularly, residential and commercial. Here is some of what we have been doing in the area lately.
-
Bathroom alteration and backflow device at the Papanui League Club
Installed a backflow prevention device and completed a large bathroom alteration at the Papanui League Club. We support the Papanui Tigers, and we also do the work.
-
Kitchen mixer replacement on Harris Crescent
Replaced a kitchen mixer at a Harris Crescent property. One of the more common jobs in the area and usually a straightforward one.
Paul is our main contact for plumbing and knows the local areas well. We send whoever is closest and best suited on the day though, so you are not waiting on one person.
FAQ
Frequently Asked Questions
Why do pressure fittings get damaged?
Usually by someone working in the roof space or under the floor who needed to move something to get past. Electricians, insulation installers, anyone in a tight space. A knocked fitting does not always leak straight away, so the damage often shows up well after the work was done.
Should I replace all the pipework or just the leaking section?
If you are doing work anyway, replace as much as you reasonably can and upgrade the hot and cold system together. Patching one section keeps the weakest part of the system and adds a new join to it, and you will be back for the next section before long.
What is a ball cock and why does it fail?
It is the valve that controls the water level in a header tank or cistern. They wear out, and when they do you either get an overflowing tank or one that will not fill. Replacement is straightforward and it is one of our most common Papanui jobs.
How much does it cost to replace a hot water cylinder?
It depends on the cylinder type, whether you stay low pressure or move to mains pressure, and how accessible the existing unit is. Moving to mains pressure or a hot water heat pump changes the pipework and valving, so we quote after seeing it rather than over the phone.
Do you charge extra to come out to Papanui?
No. Our call-out fee is the same across Papanui and our other Christchurch suburbs. We only add a travel charge for jobs genuinely outside the metro area, like Kaikoura or Akaroa.
Do you handle after-hours emergencies in Papanui?
We respond to priority repairs during business hours. Call us with an urgent issue and we will dispatch the nearest qualified technician and give you an estimated arrival time. If we cannot get there soon enough, we would rather recommend another trusted tradesperson than leave you waiting.
Pricing
What it costs
Pulled from our standard rates so there is one source of truth. See full rates and charges.
Monday to Friday, during normal working hours.
Charged in 15 minute blocks.
Repipes and solar hot water can be spread over time.
