Plumber in Ferrymead

Home » Plumber in Ferrymead

Plumber in Ferrymead, Christchurch

Whitehead Plumbing & Gas are registered Master Plumbers covering Ferrymead. We install and annually test backflow prevention devices for commercial premises here, and handle the residential work alongside it.

 

Standard hours Monday to Friday, 8am to 4:30pm. Urgent callouts after hours.

Ferrymead at a glanceUpdated Nov 2026
Council
Christchurch City CouncilDrainage and building consents
Typical construction
Timber floorsEasy access under the house for repairs
Worth knowing
Cylinders often in the roof spaceA leak up there goes through the ceiling
Most common call-out
Backflow and general repairsDevice testing, toilet replacements, leaking mixers
Also in Ferrymead Plumbing Gasfitting Drainlaying

local

What We Typically Find On Site

Ferrymead has a range of pipework, which is what you would expect from an area that has grown in stages. There is no single system to assume, so we look before we quote.

What does make Ferrymead easier than a lot of suburbs is the construction. Most homes here have timber floors rather than a concrete slab, which means we can get under the house to inspect and alter pipework without cutting into anything. Add decent ceiling access and most repairs are considerably less invasive than they would be elsewhere.

Hot water cylinders in the roof

The one thing we see more of in Ferrymead than most places is hot water cylinders installed in the roof space. There is nothing wrong with that arrangement, but it does change what happens when something goes. A cylinder leaking at ground level makes a mess. A cylinder leaking above your ceiling takes the ceiling with it.

If yours is up there, it is worth having it looked at periodically rather than waiting for a reason.

Commercial backflow testing

A good portion of our Ferrymead work is backflow prevention for commercial premises. We install the devices and carry out the annual testing, which is the part people tend to forget until it is overdue. If you run a site here and are not sure when yours was last tested, that is worth checking.

Common call-outs in Ferrymead

  • 01Backflow device installation and annual testing
  • 02Toilet replacements
  • 03Leaking hot water cylinders, often in the roof space
  • 04Leaking kitchen mixers
  • 05Alterations, straightforward with timber floor access

proof

Recent work in Ferrymead

Whitehead Plumbing & Gas work across Ferrymead regularly, residential and commercial. Here is some of what we have been doing in the area lately.

 

  • Leaking hot water cylinder on Waterman Place

    Repaired a leaking hot water cylinder at a Waterman Place property. Where a cylinder sits in the roof space, catching a leak early is the difference between a repair and a ceiling replacement.

  • Kitchen mixer replacement on Settlers Crescent

    Replaced a leaking kitchen mixer at a Settlers Crescent property.

Paul Olsen Managing Director

Paul is our main contact for plumbing and knows the local areas well. We send whoever is closest and best suited on the day though, so you are not waiting on one person.

directions

Getting to Ferrymead

We work out of 1D Grafton Street in Waltham and cover Ferrymead as part of our regular run. For commercial sites with backflow devices, we can schedule the annual testing rather than leaving you to remember it.

 

We also cover nearby:

FAQ

Frequently Asked Questions

How often does a backflow device need testing?

Annually. We install backflow prevention devices for commercial premises in Ferrymead and carry out the yearly testing. If you are not sure when yours was last done, it is worth checking rather than finding out during an audit.

My hot water cylinder is in the roof. Is that a problem?

Not in itself, and it is common in Ferrymead. What it changes is what happens if it leaks, because the water comes through the ceiling rather than across the floor. Worth having it looked at periodically rather than waiting for a reason.

Is it easy to alter plumbing in a Ferrymead home?

Usually, yes. Most homes here have timber floors rather than a concrete slab, so we can work from underneath without cutting anything out. With ceiling access as well, most alterations are less invasive than they would be in a slab-built home.

How much does it cost to replace a hot water cylinder?

It depends on the cylinder type, whether you stay low pressure or move to mains pressure, and how accessible the existing unit is. A cylinder in the roof space adds access considerations, so we quote after seeing it rather than over the phone.

Do you charge extra to come out to Ferrymead?

No. Our call-out fee is the same across Ferrymead and our other Christchurch suburbs. We only add a travel charge for jobs genuinely outside the metro area, like Kaikoura or Akaroa.

Do you handle after-hours emergencies in Ferrymead?

We respond to priority repairs during business hours. Call us with an urgent issue and we will dispatch the nearest qualified technician and give you an estimated arrival time. If we cannot get there soon enough, we would rather recommend another trusted tradesperson than leave you waiting.

Pricing

What it costs

Pulled from our standard rates so there is one source of truth. See full rates and charges.

First Hour
$158 + GST

Monday to Friday, during normal working hours.

Every Hour After
$110 + GST

Charged in 15 minute blocks.

Larger jobs
Finance

Repipes and solar hot water can be spread over time.

Need a plumber in Ferrymead?

Call the workshop and you will get a person, not a queue!